CIVIC4G.COM Menu header

boring out a 1.5

Anything 4th gen TECH related

boring out a 1.5

Postby squeek485 » Tue Aug 02, 2016 4:36 pm

so, looks like I may have to rebuild my little 1.5 due to a dead cylinder. gotta do a compression test on my lunch break, but so far everything ive done so far points to no compression. anyways, if that is, in fact, the case I was curious is there are any differences in the blocks of the D15B1 and the D16A6? would I be able to bore out the 1.5 and use that block to build my own D16A6? or are there sensors holes that are different?
Registered User
Registered User
Posts: 4
Joined: Sat Feb 27, 2016 4:54 pm

Re: boring out a 1.5

Postby Sandman » Tue Oct 04, 2016 5:35 pm

As I recall the block is different on the bottom end so that you can't fit the D16 internals in the D15 block. They will not fit to move in there.
Stand up and fight!
1988 Civic HB 1.6i-16(D16A9) R63 "Rio Red" Member ride topic
1989 Civic 4D 1.6i (D16A7) Asturias Gray Metallic Member ride topic
1993 Kawasaki Vulcan 1500
User avatar
Global Moderator
Global Moderator
Posts: 5048
Joined: Wed Sep 03, 2003 9:00 am
Location: Turku Finland

Return to Tech Discussion

Who is online

Users browsing this forum: No registered users and 10 guests